Redding Rifle Die Sets
The quality and accuracy of your reloaded ammunition depends largely on the quality of the equipment you use to assemble it.
Your choice of reloading dies should not be a casual one. Your dies literally shape the quality and function of your reloads. Because they are so important, we give them a lot of attention.
• Redding uses the finest alloy steels obtainable.
• Redding dies are machined on Super-Precision® lathes capable of holding the tightest tolerances in the industry.
• This allows Redding to guarantee that they will produce ammunition that will properly fit any standard (SAAMI) chamber, regardless of action type.
• To maintain the critical tolerances and guarantee that your dies will last a lifetime, Redding dies are carefully heat treated in atmospherically controlled furnaces.
• Finally, your dies are hand polished inside and out for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged.
• The die box is a handy cartridge loading block and storage package. Inside are storage locations for a spare decapping pin and hex wrench (both included), and even a place for your shellholder!
• All Redding dies have industry standard 7/8-14 threaded bodies.
On the pages that follow, you will find many products and design features that are uniquely Redding. Most of these products have evolved from listening to the needs and desires of our customers and helping them solve specific problems.
The design of our Profile Crimp Die is an example that came about from an attempt to help silhouette shooters solve the typical “half moon” crimp so prevalent with magnum handgun cartridges. Our solution to the problem not only solved the ugly, half crimp, but proved to tighten groups as well.
Full Length Die Sets For Botttleneck Cases
Full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built-in crimping ring and the proper seating plug.
Neck Die Sets For Bottleneck Cases
Neck die sets for bottleneck cases contain two dies. The neck (NK) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built in crimp ring and the proper seating plug.
Deluxe Die Sets For Bottleneck Cases
Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of our full length die sets (described above) with the addition of a neck (NK) sizing die.
Die Sets For Straight Wall Cases
Die sets for straight wall cases contain three dies. This is necessary because it is not possible to full length resize straight wall cases and expand the neck for proper bullet fit in one operation.
The full length (FL) resizing die contains a decapping rod assembly. The expander die (EXP) contains a neck expanding plug. The seating die (ST) includes bullet guide, built-in crimping ring and the proper
seating plug.
Rifle Die Series
Click here to view the
‘Die Caliber Reference Chart’
** Please use comments at checkout to specify the caliber you require **
“E-Z Feed” Shellholders
Redding’s new tapered design allows easier case entry to the shellholder. The “E-Z Feed” shellholders are machined to very close tolerances and heat treated to fit your cases perfectly and eliminate potential resizing problems. The universal snap-in design is recommended for use with Redding dies and presses, as well as all the other popular brands. The outside knurling makes them easier to handle and change. For proper size, refer to die reference charts.
For proper size, refer to ‘Die Caliber Reference Chart’ Click here
$12.50 AU incl GST
Add to Shopping Cart
Check Out
Please specify Shellholder # in the ‘Comments’ Section during checkout
If you can’t see what you are looking for, please email us or give us a call and we will do our best to assist you!
