BORE TECH, INC. CHAMELEON GEL TM

Bore Tech’s CHAMELEON GEL TM is a cutting edge, color indicating cleaner and polish that effectively removes heavy Carbon, Copper, Lead and Plastic fouling.  The exclusive chemical and mechanical cleaning technology is non-harming, non-embedding, biodegradable and 100% safe for all barrel types.  The easy to use gel formulation requires no mixing and cleans up quickly for a shiny barrel every time.  Recommended for:

•   Extremely Fouled Bores            Every 250-500 Rounds to Polish Bore
•   Heavy Carbon Fouling in Throat Area      

Unlike any other “bore paste” cleaner, the Chameleon Gel is the first to utilize color indicating, chemical, cleaning technology.  This in conjunction with the 100% barrel safe polish effectively cleans and shows the shooter what type of fouling is in the bore and when the bore is clean.  This combination of both chemical and mechanical action safely cleans bore in half the time of traditional bore paste cleaners.

The standard mechanical abrasion technology used for decades in traditional bore pastes turns black whether the barrel is copper fouled, carbon fouled or 100% clean.  Shooters have no indication of their bore condition and in turn over use the traditional bore pastes which will wear barrel steels.


CHAMELEON GEL      

Copper and Carbon Fouled Barrel

Copper Fouled Barrel

Carbon Fouled Barrel

Clean Barrel

If you want to quickly, effectively and safely clean your barrels, Bore Tech’s CHAMELEON GELTM is the cutting edge cleaner/polish you have been looking for.

PRODUCT SPECS
BORE TECH, INC. CHAMELEON GELTM

Bottle Type   2oz  Squeeze Tube
Cap Type   Dispensing Nozzle
Non-Flammable   YES
Non-Hazardous   YES
No Ammonia   YES
No Smell   YES
100 % Biodegradable   YES
Built-in Rust Preventative   NO


USE INSTRUCTIONS
BORE TECH, INC. CHAMELEON GELTM

Directions:
UNLOAD FIREARM
1.   First, wet bore with 1 or 2 patches of C4 Carbon Remover, Cu+2 Copper Remover or Eliminator Bore Cleaner
2.   Use the correct caliber jag and undersized patches with the “Side Spike” technique or an undersized nylon brush with a patch wrapped around
3.   Next, evenly coat a patch with Chameleon Gel
4.   Make 1 full length pass per treated patch while short stroking the bore back and forth in 2 inch increments
5.   Observe color(s) of CG to indicate fouling type in barrel
1.   Blue/Green = Copper Fouling
2.   Black = Carbon Fouling
3.   Gray = Lead/Moly
4.   White = Clean Bore
6.   Let CG remain in barrel for 3 – 5 minutes
7.   Push 2 or 3 wet patches of C4, Cu+2 or Eliminator through bore to remove CG and observe patch color
8.   Repeat steps 1 through 7 as necessary
9.   When CG remains white in color, bore is clean
10.   Before storing firearm, apply rust and corrosion inhibitor

Availability: In stock, usually ships within 1 to 3 days.