The new A-5 stock combines all the most requested features of the entire A-series into one professional tactical rifle stock. Compared to our other A-series stocks, the A-5 uses a beavertail forearm that is wider and flatter. The action and barrel sit lower for enhanced stability. The A-5 uses the trim A-3 pistol grip. The dual purpose butt hook is fully functional for either riding sandbags or controlling the rifle with the non-trigger hand. The A-5 can be made as light as 2.5 lbs. It can be made for right or left handed shooters.  Scroll down for specifications.  Click for Details

THE A5 WILL ACCEPT THE FOLLOWING ACTIONS:

    * straight comb, saddle, integral & thumbwheel adjustable cheek pieces available *

Badger m2008 - SA & LA

Barnard P & S models

BAT - (all models except the 3L & EX)

Big Horn - ( action must be sent in for fitting)

Borden - Alpine & Timberline

CZ 550 - (non magnum reciever)

Dakota 76 - (rifle must be sent in for custom fitting, fees may apply)

Defiance - SA, Med & LA

Diamondback

Grizzly II

Hall - E & M

Hart IP (square tang)

Kimber 8400 - SA & LA (adj cheek piece only for LA model)

Kodiak

Lawton 7000, 7500, 8500

McBros & McMillan G30's

Montana 1999 - SA & LA

Nesika Bay - R,E,G, J, K, L, S, M, CT, V, LT models (LT only in 1.47" dia)

PGW - Coyote & Timberwolf

Pierce - LA

Remington - 600, 660, 700, model 7, 721, 722, XP100, XR100, 40X, 788

RPA Quadlock

Sako Quad

Sako m995 (TRGS)

Savage - staggeredfeed all models (DBM model must be sent in for fitting)

             - centerfeed - single shot & blind mag only

Stiller - Predator - SA & LA, Xtreme, V, P1000

           - Tac 30, 300, 338, 408 (1.45" dia)

Templar - SA & LA

Tikka 65

Winchester - model 70 SA & LA, SPR, PBR, Pre-64, Pre-war clover leaf tang

* straight comb & saddle cheek piece only *

Browning   A-bolts, BBR, Safari models

Hart IP (rem tang)

Howa 1500 - SA & LA

Husqvarna 1600 & 1900

Interarms mk X

Mauser 98

Parker Hale

Ruger mk II - SA & LA (rifle must be sent in for fitting)

Ruger 77 - (rear tang will sit deep into stock)

RPA Quadlite

Sako - AI, AII/L579, AIII/L61R, AV, A7, 91 series, 75 series, 85 series, Finfire/P94S

Savage - centerfeed model (factory DBM or floor plate)

Tikka - 595, 695, 55, T3

Weatherby - MK V, MK V Lightweight, Vanguard SA & LA

SPECIFICATIONS

overall length of stock:  31 1/4"

depth of action area:  1.875" (this will vary depending on action model)

max diameter action:  1.55"

max diameter barrel:  1.350"

forearm width:  2.5"

grip width:  1.85"

buttstock width:  1.6"

max L.O.P. with 1" recoil pad:  13.5" (spacers can be added to lengthen LOP)

drop @ comb:  1/4"

A-4

The A-4 tactical sniper stock was originally designed for the USMC. The optional adjustable saddle type cheekpiece is comfortable and efficient. The forend is similar to the A-2 but with the bottom dropped to be parallel to the top. It has a vertical pistol grip and a butt hood for better control of the butt with the non-trigger hand. It is available with a fixed length of pull or adjustable spacer system.  The stock is ambidextrous and may be inletted for either right and left hand.

THE A4 WILL ACCEPT THE FOLLOWING ACTIONS:

*straight comb and saddle cheek piece available*

Barnard P, S & PL models (rear tang sits very high in stock)

Bat HR & VR

Borden alpine & timberline

Dakota 76 (rifle must be sent in for fitting, fees may apply)

Lawton 7000, 7500, 8000

McMillan G30's & Mcbros

Montana 1999's

Nesika j, k, l, s, m, c, t, v

Remington 600, 660, 700, 721, 722, 788, XP 100, XR 100, 40X, model 7

RPA Quadlite single shot

Savage - all staggerfeed models (DBM must be sent in for fitting), bling mag & single shot

               centerfeed models only

Stiller predator & tac-series

Surgeon - all models

Winchester -model 70's, SPR, PBR, pre-64, pre-war clover leaf tang

SPECIFICATIONS:

overall length of stock: 31"

depth of action area:  1.8" (will vary depending on action model)

max diameter action:  1.5"

max diameter barrel:  1.450"

forearm width:  1.970"

grip width:  1.9"

buttstock width:  1.6"

max L.O.P. with 1" recoil pad: 13.5" (spacers can be added to lengthen LOP)

drop @ comb:  1.4"

A-3

The A-3 is a modified lightweight version of our popular A-2 stock. It is the most widely used field sniper stock available. It is available with or without an integral adjustable cheekpiece. The forend is .312 inch shallower from top to bottom to provide a more stable platform while shooting off sand bags or a pedestal. The stock is also filled slightly larger than the A-2 but retains all the features that make the A-2 such an excellent tactical stock.  Available in right and left hand.

THE A3 WILL ACCEPT THE FOLLOWING ACTIONS:

    * straight comb, saddle, integral & thumbwheel adjustable cheek pieces available *

Bat HR & VR

Big Horn (action must be sent in for fitting)

Borden Alpine & Timberline

Dakota 76 (action must be sent in for fitting, fees may apply)

Defiance SA, Med, LA

Lawton 7000, 7500, 8000

McBros & McMillan G30

Montana 1999 SA & LA

Nesika Bay - J, K, C, S, M, CT, V models

Remington - 700, mod 7, 600, 660, 721, 722, 788, xp100, xr100

Savage - staggeredfeed all models (DBM model must be sent in for fitting)

             - centerfeed - single shot & blind mag only

Stiller - predator & Tac series

Surgeon - all models

Tikka 65

Winchester - mod 70, pre 64, pre war, SPR, PBR

A-2

The A-2 tactical stock was designed using input from the U.S. Marine Corps as well as the F.B.I. A vertical pistol grip and a straight light extra-high comb provide for better prone shooting as well as seated bench type shooting. The forend is tapered downward from front to rear which allows for small elevation adjustments by sliding the rifle forward when using a front sand bag. It can be equipped with either a 3-way adjustable butt assembly, an adjustable spacer system or fixed length of pull. A saddle type cheekpiece may be added for use with night vision equipment. The A-2 will fit most Remington, Winchester, FN Mauser, Sako, Browning, Ruger MK II, Savage, and Howa 1500 actions. Available in right and left hand.

ADJ A3-5 NEW

This stock is a variation of our famous A3 stock but with the addition of an A5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock is only available with an integral cheekpiece which gives both vertical and horizontal adjustments, and is available with either the standard or thumbwheel elevator system.

M40A-1 HTG (GENERAL PURPOSE HUNTING)

The original M40A-1 Marine Sniper Rifle stock was designed for a heavy barrel Remington 700. It can be used for either short or long actions, as well as ADL (blind magazine) or BDL (hinged floorplate). It will take any barrel contour up to a #8. This stock can also be used for most Remington, Winchester, and Savage actions. The M40A-1 is available with or without texture on the forend and pistol grip. Available in right or left hand.

NEW ADJ HTG (GENERAL PURPOSE HUNTING WITH ADJUSTABLE COMB)

The ADJ HTG adds an adjustable cheekpiece to our popular HTG stock, the original M40A1 Marine Sniper Rifle stock.  It can be used for either short or long Remington actions and will take any barrel contour up to a #8. The ADJ HTG includes texture on the forend and pistol grip.  It is available in right or left hand. 

A1-3

This stock was designed in response to a federal agency that requested certain modifications to the M40A1 sniper stock. The A1-3 features a wider forend similar to the A-3 tactical stock. The comb has been raised to the maximum height practical and the 2" wide forend allows for mounting a broad range of optical options, such as night vision equipment. The stock has stippling on the pistol grip with a smooth surface on the forend. It is shown here with optional flush mount swivel cups.

M1A

The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled match grade service rifle. It is available with out hardware in molded-in colors only. It may be completely finished with a painted exterior if all hardware is supplied by the customer. It must be properly bedded to the customers action before firing. For M14/M1A rifles only.

ADJ M3A NEW

This stock is a new version of our standard M3A with an integral adjustable cheekpiece which allows both vertical and horizontal adjustment. It is available with either the standard two thumbscrew lock elevator posts or with the thumbwheel elevator mechanism.

McHALE

The McHale stock was originally designed as a competition stock for use with a number of custom actions with thick benchrest type rear tangs. The generic rear tang area will require some fitting when used with most actions. It has a high, straight comb without a cheekpiece so the stock can be shot from either side. The belly of the stock is parallel to the top so it is best suited for a blind magazine or single shot rather than with a floorplate, which requires some taper to the belly. This stick works well with most Nesika Bay, Stolle, Hall, BAT, and other benchrest type actions which do not have the normal Remington/ Winchester tapered style rear tang. It can be inletted for the CZ-550 Magnum with heavy target type barrels at some sacrifice in cosmetics. The McHale can be inletted for both right and left hand actions.

STEYR SSG P2

The SSG P2 stock was specifically designed for the SSG based on the A-3 pattern with Steyr quick adjustable spacer system, thumbwheel adjustable cheekpiece, black anodized forend rail and Uncle Mike's sling swivel studs. It is finished in black paint.

NEW STEYR SBS

Fully fitted for the Steyr SBS .308 caliber tactical rifle, this stock comes standard with a thumbwheel adjustable cheekpiece, a spacer system on the butt, an accessory rail under the forearm, two sling studs and a textured black finish.

NEW SIG 3000

Fully fitted for the SigArms 3000 .308 caliber tactical rifle, this stock comes standard with a thumbwheel adjustable cheekpiece, a spacer system on the butt, an accessory rail under the forearm, two sling studs and a textured black finish.

PRONE

The Prone Stock was patterned after an Anschutz® 1411 Prone Rifle Stock. It can be used for smallbore using the Anschutz® or several other rimfire actions. It is most commonly used in highpower with a Remington Model 700 or a Winchester Model 70 and is recommended for a blind magazine or single shot only. It comes with an adjustable cheekpiece and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschutz® type handstop rail. Available in right or left hand.

BAKER SPECIAL

The Baker Special was designed by high power shooter Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail forend to the rear and tapered it back through the receiver area to increase stiffness. He then added a shallow drop belly so that Model 700's and Model 70's could have a custom long magazine box fabricated to hold five rounds in the magazine for rapid fire. It is available with a vertically adjustable comb and as a blind magazine only. It may have the 2-way or 3-way buttplate fitted and a forend rail, but will not accept the spacer system. It is ambidextrous and may be inletted for both right and left hand. It may also be inletted for the CZ550 magnum with heavy target type barrels, but requires some custom work on the rear tang of the stock.