BORETECH CLEANING SOLVENTS

Introducing

BoreTech Eliminator
(As featured in Australian Shooter Mag Dec 2006 Read It Here)

Until recently, cleaning a rifles bore was a scrub and swab proposition that could result in mounds of dirty patches and lots of elbow grease before they were clean. Today's high-pressure magnums and mega shotgun loads have compounded the problem. That many passes with a rod could potentially damage a crown or chamber, but we had little choice.

Enter technology! Eliminator

The most innovative Gun cleaner ever developed!

Eliminator Contains, NO Ammonia & NO Petrol Solvents.

Eliminator is NON Flammable & NON toxic.

And has virtually no odour (finally a product that won't get you kicked outside when cleaning your firearms)

The fastest easiest and cleanest way to clean your firearms ever.

4oz bottle - AU $26.00 incl gst
Add to shopping cart
Check Out

16oz bottle - AU $47.50 incl gst
Add to shopping cart
Check Out

 

Moly Magic

Features		Benefits
Surfactant Technology		Penetrates to lift the moly residue out of the steel
Free of corrosion accelerators		Makes cleaning quicker than abrasives.

Bore Tech's Moly Magic is a unique blend of penetrants, surfactants and solvents formulated exclusively to assist in the removal of molybdenum disulfide buildup in rifle bores.

Molybdenum disulfide is a substantive material, which means that it clings to metal surfaces readily, and while this is part of the mechanism which allows moly to provide friction reduction, it also makes it difficult to remove with traditional bore cleaning technology.

In very few situations is a lubricant exposed to the combined extremes of temperature and high pressure found in the bore of a high powered rifle. These extreme forces will break down any lubricant and it becomes desirable to remove the residues to restore accuracy.

Bore Tech's Moly Magic penetrates deep into the metal's pores while a specially formulated surfactant system suspends and then attracts the particles to the patch with electrostatic attraction, greatly increasing cleaning efficiency. Once cleaned, a fresh moly treatment can be applied.

4oz bottle - AU $34.00 incl gst
Add to shopping cart
Check Out

16oz bottle - AU $60.00 incl gst
Add to shopping cart
Check Out

Shotgun Blend

16oz bottle - AU $55.00 incl gst
Add to shopping cart
Check Out

Bore Tech brings shotgun cleaning into the 21st century with a specifically blended solvent for shotguns.

Shotgun Blend is formulated to safely and quickly remove the plastic and carbon deposits from shotgun barrels, forcing cones, chokes, and choke tubes, ensuring reliability from your shotgun.

Shotgun Blend by Bore Tech is the choice for discriminating shotgun shooters who demand total performance from their shotgun.

 

Black Powder Solvent

16oz bottle - AU $50.00 incl gst
Add to shopping cart
Check Out

Bore Tech's Black Powder Solvent is a product designed to provide black powder shooters with advantages not previously available in a single product. Bore Tech has specially formulated naturally derived solvents, surfactants, lubricants, and rust inhibitors into a single pleasant smelling liquid that was compounded with the environment in mind.

The surfactants and solvents used in this product are more effective than traditional soaps and are extremely biodegradable, forming harmless compounds after use. These surfactants were chosen specifically for black powder residues which differ in particle size and composition from smokeless powder residues.

This product may be used as received or mixed with hot water to form a quick acting cleaning solution that penetrates and solubilizes  black powder residues, lubes, and salts for fast and thorough removal. Unlike other products, Bore Tech Black Powder Solvent leaves behind a layer of natural, stable lubricant and rust inhibiting compound to both season the bore and prevent corrosion.

Lightning Rod Solvent

12oz bottle - AU $35.00 incl gst
Add to shopping cart
Check Out

LRS (Lightning Rod Solvent) is a specially formulated solvent for use with the Lightning Rod Combo-Tip tool. Formulated to provide an environmentally safe way to remove shotgun fouling (powder, plastic, and lead) quickly and effectively.

 

Copper Remover

16oz bottle - AU $45.00 incl gst
Add to shopping cart
Check Out

Features		Benefits
Aggressive Copper Removal.		Extremely fast acting on heavy copper  buildup.
Buffered Copper Remover. Rust Inhibitor.		Safe for your barrel. Thin film remains after cleaning.

Bore Tech's Copper Remover is a fast acting copper removing formulation designed to clean firearm bores without harm to barrel steels even after long exposure.

Bore Tech's Copper Remover contains no chlorides, nitrates or other barrel eroding corrosion initiators. Its chemical system is inhibited, providing thin film corrosion protection when cleaning is done. This formula will also remove corrosive residues from firing foreign or surplus military ammunition. Dissolved copper is complexed, rendering it unable to re-deposit onto barrel steel. Special surfactants allow fast action and quick residue removal.

 

Gun Oil

4oz bottle - AU $20.00 incl gst
Add to shopping cart
Check Ou

Features		Benefits
Super fine Teflon Particles.		Actually seals metal pores and provides unsurpassed lubrication.
Stable Blend. Rust Inhibitor.		Maintains proper suspension of  Teflon™. Works with Teflon™  to condition metal .

Bore Tech Teflon Gun Oil is a premium blend of high purity petroleum lubricating oils, dispersed super fine particle Dupont Teflon fluorocarbon resin, additives and rust preventing compounds designed to offer high performance lubrication and metal conditioning under demanding conditions.

Unlike many fluorocarbon enhanced oils, Bore Tech's Teflon Oil is stable due to special additives which keep the fluoropolymer suspended, not settled out on the bottom of the bottle.Bore Tech's Teflon Oil contains a high concentration of pure Dupont Teflon of a particle size ideal for treating metal surfaces.

This property allows a co-efficient of friction lower than graphite or moly under heavy loading and extreme pressure, reducing metal wear and yielding smoother operation.

As a metal conditioner this special preparation can be applied to warmed metal parts to seal pores with a tenacious coating of Teflon which provides lubrication and reduces fouling long after the base oils have gone.

Tef-Dri

1oz bottle - AU $20.00 incl gst
Add to shopping cart
Check Out

Bore Tech's new Tef Dri is a revolutionary new dry lubricant. Tef Dri is composed of sub-micron particles of Teflon® in a quickly evaporating carrier. The carrier evaporates after transporting the Teflon® into the most remote areas leaving a film of Teflon® in the pores of the metal. The dry film is unsurpassed lubrication that will not freeze, or attract harmful dust and debris.